Social Icons

samedi 8 août 2015

Points For Using DIY Kits Of Duracoat Aerosol

By Kathrine Franks


Gun owners rely on quality products for cleaning their firearms and expect the best from anything sold for the enhancement of weapons. Those products must do no harm to any of the materials used in manufacturing that include stainless steel, synthetics, ferrous metals, wood, and alloys. DuraCoat Aerosol is the latest in technology and simple for novices and professionals. Here is some information to help when shopping a Lawrence, KS supplier.

For people who prefer a difference in the appearance of their guns, DuraCoat offers different textures to please most gun owners including varieties of camo and pearl. Some people create layers of textures and mix and blend colors to help identify their firearm from that of anyone else.

One of the nice things about this product is the hardener that comes with it. The aerosol can is a can within a can and allows putting the hardener in without making a huge mess. The usual ratio of 12 parts DuraCoat to 1 part hardener, and greatly speeds up the drying process. Change the ratio to 10:1 for a higher glossy finish that shines like brand new.

When using the stick on templates, they leave an adhesive residue that is easily removed using mineral spirits and a clean, dry cloth. Be sure to remove all of the adhesive before applying a coat of the DuraClear so that they do not leave bubbles on the finished project. Also use a good cleaner to remove oil, grease, and any other contaminants before applying new finishes.

For the fastest drying time, many gun owners use a heat setting of 110 degrees F for about 1 hour to speed up the process and reassemble their weapons. Once the surface is completely dry most cleaners, abrasive solvents and lubricants will not harm the new finish. For best results allow three to six weeks for full drying and curing.

For people who want to colorize their guns, DuraCoat comes in over 200 different colors, and you can mix those to get an exact match of shade you want. Just think of all the possibilities of identifying a weapon just by its color and texture. Not to mention being proud of the choices of hues and designs.

Remember that a clean surface is the best to ensure the desired results of any firearm customization. Once dismantled check all interior surfaces, and if necessary use a mirror to make sure all corners and crevices are clear of debris. DuraCoat Cleaner is excellent for this procedure because it leaves no film or residue.

Always dismantle a gun for safety reasons before attempting to clean it, repair it, or refinish it. Make sure all compartments have no ammunitions in them. Check the cylinder, the bullet clip and chamber to make sure the gun is unloaded. Then dismantle it and mask off any areas not intended for DuraCoat before spraying the product on the pieces.

There is no such thing as too much safety when dealing with firearms that use explosives. When cleaning and oiling guns use the proper tools to dislodge any debris especially inside where dirt often collects. Then use the very best grade products to clean, maintain and customize your entire collection.




About the Author:



Aucun commentaire:

Enregistrer un commentaire

 

Sample text

Sample Text

 
Blogger Templates